- Messages
- 857
Gibbs adjustable razor
- Thread starter Blademonkey
- Start Date
OP
- Messages
- 17,589
- Location
- Sunny Cornwall
- Thread Starter
- #18
Looks like the bottom knob came off a aluminium set then....Maybe?Nope, not just me.
Sent from my Nexus 5X using Tapatalk
- Messages
- 857
Possible. Not enough photos out there to say for sure. Thing is, it's not aluminum, in fact it's .7g heavier than the knob/spindle in my unmarked one.
History of these is woefully undocumented, at least in English.
Sent from my Nexus 5X using Tapatalk
Last edited:
- Messages
- 617
- Location
- Rijeka, Croatia
Ideed! When I try to find some information about Gibbs it was very hard work. Some usefull information o found just in some French and German forums. But my French and German are... well, let say - baaad.
But there was just few small information.
Poslano sa mog EVA-L19 koristeći Tapatalk
- Messages
- 857
I have not read the entire thread but there is a pretty good discussion here:
http://www.rasage-traditionnel.com/t8231-gibbs-reglable-n17
The punch under discussion there is on Amazon.
Sent from my Nexus 5X using Tapatalk
Last edited:
OP
- Messages
- 17,589
- Location
- Sunny Cornwall
- Thread Starter
- #22
Is this the correct size of punch? There is a smaller one by the same company.I have not read the entire thread but there is a pretty good discussion here:
http://www.rasage-traditionnel.com/t8231-gibbs-reglable-n17
The punch under discussion there is on Amazon.
Sent from my Nexus 5X using Tapatalk
- Messages
- 857
According to the above thread 1/8" is correct. Note that there is a Martha Stewart branded HD 1/8" punch on Amazon which specifically indicates use with light metals for a few dollars more.
Sent from my Nexus 5X using Tapatalk
OP
- Messages
- 17,589
- Location
- Sunny Cornwall
- Thread Starter
- #24
Nice one, thanks.
- Messages
- 617
- Location
- Rijeka, Croatia
- Messages
- 549
- Location
- Cyprus
Thank you all for all the great info, now I have to have one.
OP
- Messages
- 17,589
- Location
- Sunny Cornwall
- Thread Starter
- #27
You must, they are fantastic little razors, so smooth but efficant enough to suit most people, the French Ebay is the best place to try, sometimes it will say they won't post outside of France but I have found that a chat to the seller usely does the trick. Make sure the black plastic handle has no cracking at the top or bottom, the only weak point on the razor but is ok as long as it's not over tightened.
Good luck with your quest to track a good one down, expect to pay £30-50 depending on if it's boxed or not and condition.
- Messages
- 549
- Location
- Cyprus
Thank you Blademonkey, you have been of invaluable assistance to me on several occasions so far and I feel indebted to you.
I found one and already asked about the handle. I only hope the seller will answer my questions and post to Cyprus. Then I'll figure out a way to punch the feathers to fit.
I found one and already asked about the handle. I only hope the seller will answer my questions and post to Cyprus. Then I'll figure out a way to punch the feathers to fit.
- Messages
- 617
- Location
- Rijeka, Croatia
@Blademonkey tell you everything you need to know before buying this little gem.
If you have any questions about it - ask! Perhaps, if you are not sure - give us a pictures and we can help! [emoji6]
Good hunting!
Poslano sa mog EVA-L19 koristeći Tapatalk
- Messages
- 617
- Location
- Rijeka, Croatia
BTW When you are on french bay, sometimes is good idea to find rasoir Gibbs and rasoir Ibbs. You can find something interesting [emoji6]
Poslano sa mog EVA-L19 koristeći Tapatalk
- Messages
- 549
- Location
- Cyprus
I've just received an answer, it is steel and bakelite handle claimed to be in perfect condition.
To be on the safe side, I found another one without the box but in good condition. There is a picture of the dismantled handle and looks in good order, no cracks. On both of them the guard looks straight.
To be on the safe side, I found another one without the box but in good condition. There is a picture of the dismantled handle and looks in good order, no cracks. On both of them the guard looks straight.
Last edited:
- Messages
- 549
- Location
- Cyprus
One question. How aggressive could a Gibbs adjustable be? Will it fall in my efficiency margin. I use the Fatboy @8 and the Variant @4.5. to 5 with a feather, Rockwell 6S@6+ 2shims.