- Messages
- 7,927
- Location
- Taured
Through someone on the forum who knows someone who does ceramic coating of razors I had the following three done.
The results varied fairly considerably, although none were bad.
Every razor was not new so there were some minor imperfections here and there as you might expect in wear and tear over the decade.
First up is the aluminium Tech. This was, in my opinion, really well coated.
Some missing paint on the thread and its corresponding hole which doesn't bother me.
A small burr on the bottom of the handle.
The results varied fairly considerably, although none were bad.
Every razor was not new so there were some minor imperfections here and there as you might expect in wear and tear over the decade.
First up is the aluminium Tech. This was, in my opinion, really well coated.
Some missing paint on the thread and its corresponding hole which doesn't bother me.
A small burr on the bottom of the handle.