- Messages
- 1,232
ok, ive got a cjb razor here im planning on putting a set of homemade scales on.
here is a pic before i started
cut down the centre at the top.
then remove handle (there is a little bit that goes through the hole on the inside you need to cut.
then use something to pack the hole e.g. solder etc or i used blue sleeving i had on desk at the time
these are the temp test scales
im making some atm out of walnut that i will eventually put it in, ill post on here when i have made them
here is a pic before i started
cut down the centre at the top.
then remove handle (there is a little bit that goes through the hole on the inside you need to cut.
then use something to pack the hole e.g. solder etc or i used blue sleeving i had on desk at the time
these are the temp test scales
im making some atm out of walnut that i will eventually put it in, ill post on here when i have made them