- Messages
- 6,299
- Location
- Norfolk, England
Welcome! I'm a bit of a heretic around here because I do sometimes use an electric shaver; however, I only use it if I am in too much of a rush for a proper, DE (double edge) safety razor shave using a brush, shaving soap or cream, proper beard preparation etc. In addition, I only use the electric when there's no need for me to look totally clean-shaven all day, as I don't think electrics are capable of it without forcing the cutters onto your face (which is what I suspect you've been doing), and my face would be worse than your neck if I tried. Essentially, I use it to keep any stubble to a semi-decent level if I really can't have a full wet shave, though I'd point-out that I keep usage of the electric to a minimum.
As for advice - first of all, get used to skimming your electric gently across your face and neck with minimal pressure. Secondly, try wet shaving in some form - I'd normally suggest a safety razor that takes single, disposable blades with two cutting edges, usually called a DE razor - however, if you've never wet shaved before, you might be better-off using a simple cartridge design with as few blades in the head as possible. I've heard good reports about the Boots twin-blade, which is effectively a clone of an old twin-bladed Gillette Sensor - so much so that it'll take Sensor cartridges which are available from some chemists and eBay. Most importantly, stay clear of any canned foam or gel - get yourself either a brushless cream or a tube of Palmolive Classic cream. Initially, I'd suggest applying by hand and working the lather into your beard with your fingertips, then making one pass of the razor in the direction of the growth of your beard. Once you're used to this procedure, we can recommend a good shaving brush which you use to build lather and work it into your beard growth. Only once you've mastered lathering and a single-pass shave with the cartridge would I suggest going the DE route.
As for advice - first of all, get used to skimming your electric gently across your face and neck with minimal pressure. Secondly, try wet shaving in some form - I'd normally suggest a safety razor that takes single, disposable blades with two cutting edges, usually called a DE razor - however, if you've never wet shaved before, you might be better-off using a simple cartridge design with as few blades in the head as possible. I've heard good reports about the Boots twin-blade, which is effectively a clone of an old twin-bladed Gillette Sensor - so much so that it'll take Sensor cartridges which are available from some chemists and eBay. Most importantly, stay clear of any canned foam or gel - get yourself either a brushless cream or a tube of Palmolive Classic cream. Initially, I'd suggest applying by hand and working the lather into your beard with your fingertips, then making one pass of the razor in the direction of the growth of your beard. Once you're used to this procedure, we can recommend a good shaving brush which you use to build lather and work it into your beard growth. Only once you've mastered lathering and a single-pass shave with the cartridge would I suggest going the DE route.